Outerimpact 45 Degree Offset Optic Mount – MRA Top Plate

45 Degree Offset Optic Mount MRA Top Plate
The OuterImpact 45 degree offset optic mount is able to accept 3 separate tops. This MRA Top Plate is compatible with all of the 31 confirmed Red Dots our current M.R.A. adapters accommodate.

The 45 Degree Offset Optic Mount MRA Top Plate is made of billet 7075 aircraft aluminum and is hard coat anodized. All mounting hardware is included along with the alignment pins.

Thank you for your interest in our products. Check out our FAQ for answers to common questions and feel free to contact us at support@outerimpact.com.

MRA Compatible Red Dot Sights (Mounting Screws INCLUDED):
Trijicon RMR/SRO – some weapons may experience ejection issues using the SRO
Docter
Insight MRDS
Eotech MRDS
Leupold Delta Point
Leupold Delta Point Pro
Vortex Razor
Vortex Viper
Vortex Venom
Vortex Defender CCW
Burris Fast Fire 2 & 3 & 4
CMORE RTS & STS
Shield RMS – requires a purchase of these screws
Holosun 507 ”C”/407 ”C” V1 versions – requires a purchase of 6-40 Screws For Holosun V1 Red Dot)
Holosun 507 ”C”/407 ”C” V2 and X2 versions – screws included in OuterImpact Screw Pack
Holosun 507 ”K”/407 ”K” models require the Micro adapter
Holosun 508 ”T”
UTG Reflex Micro Dot
TruGlo Tru-Tec
Sig Romeo 3
Sig Romeo 3 Max
Sig Romeo 3 XL
Crimson Trace CTS-1250
Springfield Hex Dragonfly – must also use OEM provided spacer plate
Bushnell RXS-100 and 250
Kahles Helia RD
Creative XP Glass Eagle – requires a purchase of M3–0.5 x 10MM screws
Noblex NV G
SOUSA DARC Micro – requires a purchase of M4 x 8mm Socket Head screws
Specifications:
Mounting Hardware (3 tops):
(1) M3 x 8mm Socket Head Cap Screws
(2) 6-48 Weaver T-10 Torx Head Screws
(2) Sight alignment pins
(2) M3 x 8mm Flat Head Screws
(2) M3 x 6mm Torx Flat Head Screws
(2) M3 x 6mm Socket Head Cap Screws
(2) 6-40 Flat Head Screws – RMR
(2) M4 X 10mm Rounded Head Screws
Required Installation Tools:
Torque Driver
Extended shank T-10 Bit
Please follow mounting instructions included with the optic.

Material: Billet 7075-T6 aluminum.
Finish: Black Anodize
Coating: Anodize
Dimensions: Height – .152″ Length – 2.03″ Width – 1.07″
Additional Tools: T-10 Torx driver (not included).