EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Savage / Stevens 301 - 12 and 20 Gauge Models

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.78"
Overall Width: 1.1"

Mounting Hardware:
(2) 6-32 Flat Head Screws - Requires 5/64 Wrench or Driver
(2) 8-40 Torx Screws - Requires T10 Wrench or Driver

Red Dot Fitment:
Trijicon RMR
Trijicon SRO
Holosun HE407C
Holosun HE407C X2
Holosun HE507C
Holosun HE507C X2
Holosun HS407C
Holosun HS407C X2
Holosun HS507C
Holosun HS507C X2
Swampfox Kingslayer
Swampfox Liberty
Swampfox Justice

Simply remove the factory mount and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your original mount at any time. Mounting hardware included.

Installation Instructions
- Remove the factory mount
- Install the EGW Sight Mount on the raised interface
- Secure the plate to the barrel of the gun with the provided screws and torque to 20 in/lbs
- Place the red dot sight on the EGW Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided red dot mounting screws
- Torque red dot mounting screws to 15in/lbs

The screws that are included with this mount require a 5/64'' allen wrench for installation.
 

By purchasing EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Savage / Stevens 301 - 12 and 20 Gauge Models from our online store, you are guaranteed to receive a high-quality item. We work with trusted brands to offer shooting and hunting enthusiasts, both amateur and professional, quality products at a reasonable price. Choosing to buy from us means opting for quality and practicality