EGW Universal Viper/Venom .670" Radius Sight Mount

EGW Universal Viper/Venom .670" Radius Sight photo
$49.99
Availability: Out of stock
SKU: 49325
Barcode: 8600001057830
Brand: EGW
Size: Radius .670"
Material: Aluminum 7075

Mounting Hardware is Included
6-48 X .313" Overall Length
8-40 X .313" Overall Length
8-40 X .335" Overall Length

This mount has now been updated to accommodate even more platforms! See the listings below.

This mount has a bottom radius of .670". There should be a slight gap at the top of the radius between the receiver and the mount when mounted.

The Winchester SX4 requires 8-36 x 3/8 screws which are not provided with this mount.

Red Dot Fitment:
Vortex Viper
Vortex Venom
Burris Fast Fire 1, 2, 3, 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot

This mount has a bottom radius of .670". There should be a slight gap at the top of the radius between the receiver and the mount when mounted.

The four spreads on this mount measure:
.500"-.505"
.600"
.860"
1.4"

Common Applications:

Shotgun:
Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws)
Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
Browning A-Bolt 12 Gauge
Franchi Affinity
Mossberg 500, 590, 835, 930, 935 Pre '97
Mossberg 500, 590, 835, 930, 935 Late (after '97) (Requires 8-40 and Longer Screws)
Remington 870
Remington 1100
Remington 1187
Savage 210
Savage 212
Savage 220
Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
Winchester 1300
Winchester SXP


Rifle:
Remington 700, 722, 40x
Remington 783
Remington 710/770
Remington XP 100
Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
Savage Arms Centerfire Models
Winchester 70

The screws that are included with this mount require a 5/64'' allen wrench for installation.

The Winchester SX4 requires 8-36 x 3/8 screws which are not provided with this mount.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs
Radius: .670"

Mounting Hardware:
(2) 6-32 Button Head Screws
(2) 6-32 Flat Head Screws
(2) 6-48 x .313" Torx Head Screw
(2) 8-40 x .313" Torx Head Screw
(2) 8-40 x .330" Torx Head Screw

Red Dot Fitment:
Vortex Viper
Vortex Venom
Burris Fast Fire 1, 2, 3, 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot

This mount has a bottom radius of .670". There should be a slight gap at the top of the radius between the receiver and the mount when mounted.

The four spreads on this mount measure:
.500"-.505"
.600"
.860"
1.4"

Common Applications:

Shotgun:
Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws)
Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
Browning A-Bolt 12 Gauge
Franchi Affinity
Mossberg 500, 590, 835, 930, 935 Pre '97
Mossberg 500, 590, 835, 930, 935 Late (after '97) (Requires 8-40 and Longer Screws)
Remington 870
Remington 1100
Remington 1187
Savage 210
Savage 212
Savage 220
Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
Winchester 1300
Winchester SXP


Rifle:
Remington 700, 722, 40x
Remington 783
Remington 710/770
Remington XP 100
Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
Savage Arms Centerfire Models
Winchester 70

This base is able to be used on applications that use a Weaver #19 base.

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

*All ADE mounts require 6-32 x 3/8" screws.

Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.

 

Leave a comment