EGW DeltaPoint Pro Ruger PC Carbine Sight Mount

Mounting Hardware is Included

This Mount Fits:
Camp Carbine 9mm (does not fit the early models, the hole spacing is different)
Camp Carbine 45
Glenfield 30
Henry Big Boy (H006)
Henry 3030 (H009)
Henry 4570 (H010)
Henry Big Boy (H012)
Henry Long Ranger (H014)
Henry .410 (H018) Only fits the 20" Barrel
Henry Side Gate Lever Action (H024)
Henry Long Ranger
Marlin 1895
Marlin 1894
Marlin 336
Marlin 375
Marlin 444
Marlin Model 36
Ruger PC Carbine*

*This mount only works with the Ruger PC Carbines that do not have the AR style handguard.

*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

We have found that the included screws may need to be shortened due to dimensional differences in receivers.

Mounting Hardware is Included

This Mount Fits:
Camp Carbine 9mm (does not fit the early models, the hole spacing is different)
Camp Carbine 45
Glenfield 30
Henry Big Boy (H006)
Henry 3030 (H009)
Henry 4570 (H010)
Henry Big Boy (H012)
Henry Long Ranger (H014)
Henry .410 (H018) Only fits the 20" Barrel
Henry Side Gate Lever Action (H024)
Henry Long Ranger
Marlin 1895
Marlin 1894
Marlin 336
Marlin 375
Marlin 444
Marlin Model 36
Ruger PC Carbine*

*This mount only works with the Ruger PC Carbines that do not have the AR style handguard.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (3) 6-48 Torx Screws
Red Dot Fitment:
Vortex Defender-CCW 3 MOA Red Dot Sight
Vortex Defender-CCW 6 MOA Red Dot Sight
Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
Crimson Trace CTS-1500
Holosun 407K*
Holosun 507K*
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero
(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)