EGW DeltaPoint Pro Ruger Auto Sight Mount

EGW DeltaPoint Pro Ruger Auto Sight photo
$49.99
Availability: Out of stock
SKU: 49420
Barcode: 8600001057069
Brand: EGW
Compatibility: Ruger *
Material: Aluminum 7075
Cookies are disabled in your browser. The website functionality may be broken.

Mounting Hardware is Included

This mount fits:
Ruger MK I
Ruger MK II
Ruger MK III
Ruger MK IV
Ruger P85
Ruger P90-95
Ruger P97
Ruger 22/45

This mount does not fit (including but not limited to):
Ruger 5.7
Ruger P89

*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 X 3/16 Set Screws
Red Dot Fitment:
Vortex Defender-CCW 3 MOA Red Dot Sight
Vortex Defender-CCW 6 MOA Red Dot Sight
Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
Crimson Trace CTS-1500
Holosun 407K*
Holosun 507K*
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero
(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

 

Leave a comment

Ruger
᠁ Ruger P95
᠁ Ruger Mark II
᠁ Ruger Mark III
᠁ Ruger Mark IV
᠁ Ruger P93
᠁ Ruger P90
᠁ Ruger P85
᠁ Ruger P91
᠁ Ruger P92
᠁ Ruger P94
᠁ Ruger Mark I
᠁ Ruger P97
Cookies are disabled in your browser. The website is working in a limited mode. To use full website functionality you should enable cookies in your browser.