EGW Trijicon RMR Sight Mount for GI 1911

This mount will not work with the optics ready models.

This mount will not work with the RMRcc.

Mounting Hardware is Included

This mount fits:
1911s with a G.I. style rear sight cut
Springfield 1911A1
Iver Johnson 1911A1
Iver Johnson 1911A1 9
Iver Johnson Falcon 45
Iver Johnson Thrasher 45
Iver Johnson Thrasher 9
Iver Johnson 1911A1 Chrome 38W
Iver Johnson 1911A1 Chrome 38P
Iver Johnson 1911A1 CHRW45
Iver Johnson 1911A1 CHR45P
Iver Johnson 1911A1 CHR45WP
Iver Johnson 1911A1 Zombie
Iver Johnson 1911A1 Copperhead
Iver Johnson 1911A1 Water Moccasin
Iver Johnson 1911A1 Boa
Iver Johnson 1911A1 Muddy Girl 9mm
Iver Johnson 1911A1 Digital Navy
Iver Johnson 1911A1 Digital Snow 45ACP

Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.

Save $20 and get free shipping when you purchase a Holosun Sight with this mounting plate!

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2, Swampfox Kingslayer / Liberty / Justice

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.