EGW Trijicon RMR / SRO, Holosun 407c / 507c Sight Mount Adapter for Sig P322 Optics Ready

This mount will not work with the RMRcc.

This mount fits the Sig Sauer P322 Optics Ready pistol and will allow you to mount a Trijicon RMR red dot sight. Simply remove the rear sight on your gun and replace it with our mount. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Mounting Hardware is Included

This mount fits:
Sig Sauer P322 Optics Ready

Installation Instructions
- Remove the rear sight plate*
- Install the EGW Sight Mount on the slide
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.780"
• Overall Width: 1.1"

Mounting Hardware:
(2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key
(2) M3 x .5 x 8mm Flat Head Screws - Requires use of 2mm Hex Key

Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2, Swampfox Kingslayer / Liberty / Justice

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.