EGW Red Dot Mount for Colt Python, Colt Anaconda Post 2020 (Trijicon RMR / SRO, Holosun 407c / 507c )

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

This mount fits:
Colt Anaconda (fits 2020 and newer models)
Colt Python (fits 2020 and newer models if the second screw hole is drilled and tapped in the top strap)

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque 6-40 x 3/8 mounting screw to 20 in/lbs
- Torque 4-48 x 3/8 mounting screw to 10 in/lbs
- Torque red dot mounting screws to 15 in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"

Mounting Hardware:
(2) 6-32 x 7/16" Flat Head Screws
(1) 6-40 x 3/8 Flat Head Screw
(1) 4-48 x 3/8 Flat Head Screw

Red Dot Fitment:
Trijicon RMR
Trijicon SRO
Holosun HE407C
Holosun HE407C X2
Holosun HE507C
Holosun HE507C X2
Holosun HS407C
Holosun HS407C X2
Holosun HS507C
Holosun HS507C X2
Swampfox Kingslayer
Swampfox Liberty
Swampfox Justice