EGW DeltaPoint Pro (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) for Sig Sauer P220, P226, P229, P320 Oversized

EGW DeltaPoint Pro (fits Shield RMS/RMSc/SMS, photo
$49.99
Availability: Out of stock
SKU: 49415-OS
Barcode: 8600054207534
Brand: EGW
Compatibility: SIG *
Material: Aluminum 7075
Coating: Matte Black Hardcoat

Mounting Hardware is Included

This mount is oversized by .010" and is meant to be used with slides that are cut oversized.

This mount fits (including but not limited to):
Sig #8 Sights
P210A Standard
P220
P224
P225
P225-A1
P226
P227
P228
P229
P238
P239
P245
P320
P938
SP2022
M11-A1
MK25
Bersa Thunder UC Series (9/40/45)
Bersa Thunder HC Series (9/40/45)
FN 509

This mount does not fit:
Sig 1911s
Sig P220 10mm Hunter
Any Optics Ready Sigs i.e. P226 Legion RX, P229 RX, P320 X-Carry etc.
P210 Target
P365 (The dovetail cut is too deep to work with our mount)
FN 509 Tactical

Our sight base is compatible with Sig #8 rear sight cuts.

*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
Vortex Defender-CCW 3 MOA Red Dot Sight
Vortex Defender-CCW 6 MOA Red Dot Sight
Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
Crimson Trace CTS-1500
Holosun 407K*
Holosun 507K*
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero
(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

 

Leave a comment

SIG
᠁ SIG P226
᠁ SIG P320
᠁ SIG P210
᠁ SIG P238
᠁ SIG P938
᠁ SIG P220
᠁ SIG P239
᠁ SIG P229
᠁ SIG P225
᠁ SIG P228
᠁ SIG SP2022
᠁ SIG P225A
᠁ SIG P227
᠁ SIG M11-A1
᠁ SIG P245
᠁ SIG P224