EGW Blank Trigger w/ Tank Treads

We've made some major strides on our trigger. With this trigger, there is no over travel screw to come loose and make the gun inoperable. People often fiddle with the over travel screw thinking it will change the weight of the trigger pull. On a 1911 format gun the trigger screw simply adjusts travel of the trigger. If in too far, the hammer will not fall and the screw blocks the rearward travel. It actually adds weight to the trigger pull!

These only fit single stack pistols.

We use Trigger bows made on original Videki dies. Videki was the industry standard for triggers.

The face is almost flat with a very slight radius. The advantage here is that the center of your finger touches the serrations, giving you more feed back than a trigger that touches half way around your finger. If you catch the trigger up or down from the middle with a bad draw the trigger still feels comfortable.

We not only stake the bow into the trigger, but we also red Loctite it in. If one system fails, the other is there to ensure a solid mount. We've tested our staking capabilities by twisting a bow with a pair of pliers from straight up to straight down. During this test, nothing moved in the staked area.

The trigger shoe is taller to allow fitting even in frames that are a little out of spec.

Standard steel 1911 triggers weigh approximately 220 grams, whereas our aluminum triggers range in weight from 108-133 grams. With our lighter triggers, your finger has to exert less effort to get that heavy trigger moving towards the rear of the frame.

Our lightweight triggers reset a few thousandths of a second quicker, helping decrease the time factor between shots.

Our triggers are not intended to be a "drop-in" part, they are oversized to allow for precision fitting to the frame morties. A finger pad which wiggles up and down or tilts inside the frame makes for a lousy feeling trigger press.

The bows we use are highly polished on the edges and sides, allowing the trigger to smoothly travel inside the frame channels. It also creates a smooth contact point where the rear of the trigger presses against the "spade" of the disconnector. Less friction = a better feeling trigger press.

We are unable to ship this item outside of the United States. If this item is purchased as part of an international order, the item will be removed from the order. The account will be refunded for the item, and the remainder of the order will ship.